This is the way to change your Twingo Interior Light to a Clio Light.
Sorry for the poor photos, i took them from my phone.
1) Take the clear plastic off the surround by just holding it and pull with your hands, nothing can break.
2) Push the clip(circled) in and then pull the surrond down and you can slide the whole unit out.
3) Unclip the adaptor from the unit.
Push the bit circled down to unclip it.
4) Now you can get the new unit and plug in the adaptor into the socket circled.
5) Slide it back up into the space, the left side first as shown in the picture below.
6) Once it is cliped in place, install some bright leds
7) Fit the clear plastic and your job is done
Thanks for reading
Andrew
Sorry for the poor photos, i took them from my phone.
1) Take the clear plastic off the surround by just holding it and pull with your hands, nothing can break.
2) Push the clip(circled) in and then pull the surrond down and you can slide the whole unit out.
3) Unclip the adaptor from the unit.
Push the bit circled down to unclip it.
4) Now you can get the new unit and plug in the adaptor into the socket circled.
5) Slide it back up into the space, the left side first as shown in the picture below.
6) Once it is cliped in place, install some bright leds
7) Fit the clear plastic and your job is done
Thanks for reading
Andrew