Problem H&R springs

[NappYBG]

Hello

last week i changed my original springs on my Twingo RS pre lift with the H&R -25mm.

I had to change the bearing of both front suspension, i post a similar photo of them (the left one i changed).

I picked up my Twingo but it makes a terrible noise.

When i park and turn till the end the steering it makes a loud toc, sometimes 2 toc toc, from the front.

From the rear, i think, is not easy understand where it comes, seems that something rattle when you take some holes.

The Twingo has 85.000km, i haven't checked the front ball joint.

 

[MovingShadow]

If it makes a knocking noise that you feel it at the pedals, check the balljoints first.

 

[Brad133]

Mine did this, turned out to be drivers side drop link

 

[NappYBG]

Ok, thanks. This week i will check balljoints and the drop link.

 

[Spitfire1]

Sounds like spring binding, does it do it when you go lock to lock, if so you might want to turn the spring on the seat, also apply a little grease to the top coils as that is normally where it occurs.

 

[NappYBG]

Ok, thanks.

And for the noise from back?

I've tried to mouve the seat, plug the seatbelts but nothing. The noise comes from the suspension/spring rear.