Recent content by TripleJay

If U retro fit RS Monitor (not sure if possilbe for 2008 MY), it shows the water temperature. The oil temperature as well, but since there is no oil temperature HW sensor, it is only calculated somehow. Easiest way I guess would be via some OBD reader and app, at least for water.

I had to go for aftermarket exhaust due to rust/hole on backbox and OEM not available. Also no avaible is some front steering rack parts, available only as refurbed. If its damaged beyond repair, we are done :(

Good hunt, mate. Generally I had no single issue with the car in 10+ years and 95k km (failure wise). Just make sure chassis, steering rack, exhaust, are in good shape, since many parts are no longer available OEM and/or new. Apart from that it is good old analog naturally aspirated pocket...

I guess it depends. If it is CUP chassis, it is sensitive to road quality, hitting pots etc., since in general they are very stiff and hard coils. I have CUP chassis. My rear right coil was dead after 55k km. My right front coil was dead after 70k km. I blame it on driving at the city with bad...

Hope it helps somehow...

Welcome and enjoy your new mini pocket rocket 🥳

Yes, Cup suspension is just lower (-4 mm I believe) springs, and firmer dampers (marked with purple colour - rear, and orange - front https://www.kamracing.co.uk/car-tuning/renault/renault-twingo-mk2-rs/suspension/renault-twingo-mk2-rs-cup-dampers-133-renaultsport.html). Also EU Cup suspension...

Few photos from track day on a former go-cart track. Had a blast... Twingo went without any doubts, apart from friends bmws who fried brakes and had some exhaust problems.

Cheers mate, appreciate :)

Hi guys, can you check for me if you have front wheel/brake disk protector (see the diagram part no. 8/9)? I do not have any and to be honest I cant recollect if I have ever seen it there... Cheers.

I would say rarely, or at least I cant hear it. Saw it spinning today at a raceday when I stopped after few laps and opend the bonet.

No problem mate, glade I could help...

Here U go.

RS monitor part should be: 280347874R. It doesnt work with standard OEM radio with no bluetooth (but the radio itself works, as I mentioned above). The uprated unit with bluetooth should work with it (matrix display). The non matrix display is smaller and with two buttons for time setting. The...

I have put in aftermarket radio before so I wont "lose" radio display when I upgraded to RS monitor, since OEM radio didnt work with RS monitor display. Now I have put back the OEM unit, it works ok, just without display. I can still change and store radio ets. so no biggy for me. It should be...