"Back to Standard" Sale - Various - Scotland, FK10

[madmatt]

Hi All,

I'm selling up so the Twingo RS is going back to standard.

Location - Central Scotland

Available is:
Apexi N1 Black Edition exhaust, from 1st silencer box back, no other silencers in it. Custom Stainless Creations built from 304 Stainless - SOLD

Mitsubishi Evo 4 Recaro seats, OMP Subframes, Sliders - £300 + Postage

Driver's Leg Bolster

Driver's Kidney Bolster

No tears on back

Rota Slipstream 15x7" Powdercoated by Back-o-hill Powdercoaters in White. 2 Wheels could be re-powdercoated to be perfect (a couple of nicks out them.) Yokohama AD08R x 2, Yokohama AD08 x 1, Toyo R1-R x 1 [SOLD]

HEL Racing Stainless Steel Brake Lines, Clear Sleeve, Stainless Connectors (not Galvanised) WITHDRAWN FROM SALE

Custom Air Intake. ASH Silicone Hoses and Alloy intake pipe with breather inlet, Heatwrapped, HKS Hipower Mushroom Filter (hoses have been butchered to make them fit so it isn't pretty underneath but seals fine, cost me much more to put together) - SOLD

OMP Steering wheel boss and resistor, fitted for less than a month - £50

Takata Race 4 Harness, Black, Snap Fitment, 3" Shoulder Straps, 2" Lap Straps. This is my passenger harness so was used for about a month (Girlfriend hated it :lol. Spotless Condition. All Eyebolts included. - £200 + Postage

I'm open to offers so please feel free to ask.

Please don't hesitate to ask if you have any questions.

Many Thanks,
Matt

 

[user 980]

Everyone's going back to standard and selling up haha

 

[madmatt]

I know new car is calling me :/

 

[sullii94]

Is the tow strap for sale? And whatever it's fastened on with?

 

[madmatt]

I THINK I still have it kicking about, it's pretty faded though. You'd honestly be better buying new!

Don't know if I have the bolt still. I just drilled though the back of the OE mounting point and pulled a LARGE bolt through it.

 

[jakeyb19]

Pictures of the seats please?

 

[LC]

Messaged you about the exhaust on Facebook

 

[oscar]

Messaged you about the exhaust on Facebook

something else i'll be installing when i'm down? awesome! now try and keep up with me

 

[oscar]

wait, it's for a 133 not a gt. different piping diameter and downpipe connection / length exhaust!

 

[LC]

wait, it's for a 133 not a gt. different piping diameter and downpipe connection / length exhaust!

Would someone be able to chop it up for me or would it be cheaper to just get one made?

 

[oscar]

(sorry matt lol) cheaper to get one made up it would only cost you 250-300 pounds where as you'd need to have pieces made up to fit into your system and the piping size is all different over the two cars.


it's hard not to swear but that's a cracking foooken price for an apexi n1 system, it's not a big bulging jap can and it sounds awesome!

 

[sullii94]

I THINK I still have it kicking about, it's pretty faded though. You'd honestly be better buying new!

Don't know if I have the bolt still. I just drilled though the back of the OE mounting point and pulled a LARGE bolt through it.

Ahh right thanks anyway mate!

 

[lgonzalez]

I would love that exhaust but logistics of it and distance is too much. I couldn't be much farther away if I tried!! Other end of the country in Kent lol :-(

 

[LC]

I would love that exhaust but logistics of it and distance is too much. I couldn't be much farther away if I tried!! Other end of the country in Kent lol :-(

Drive 6/7 hours of englands finest motorways will be fun with your cup chassis don't worry about me I'm just jealous

 

[lgonzalez]

It would be tempting although I really don't have the money to, I'm going to have a strop now haha.

 

[oscar]

if you're going to the donnington french car show thing w/e it's called, i'm sure matt wouldn't mind dropping the exhaust off to me and i could deliver it down to you if you're going

 

[lgonzalez]

Oooh yer...depends if it's still for sale by then lol. And it would be a case of having to take it, fit it to mine and take mine off before sending my standard one back up the country...although there is trax and the end of season expo???

 

[madmatt]

Guys, thought I'd chime in before plans were made.

1 - The pipe diameter on the system is 2". I wanted to keep it as consistent through the system as possible.

2 - Depending on where the over axle bend is on the GT, the backbox itself MAY fit. The midpipe is just a straight section from the front box.

3 - The MAIN ISSUE: I need a standard 133 exhaust as mine was taken by the company for scrap. Unless someone wants to find me one on the cheap, a PX would be best. I appreciate the logistics of this make is somewhat complicated.

My car is being used daily and I can't imagine the ol bill would appreciate me driving about with no exhaust on :lol:

 

[lgonzalez]

Yer same problem here is that I use my car on a daily basis :-/ its hard to do because of the distance because if you were closer id say come down the workshop and put both cars in the air and swap them straight over.

 

[madmatt]

Seats back up for Sale.

I'll get pictures tonight once I've given the car a damn good wash.
The wheels won't be immaculate tonight but will be polished and cleaned as intensely as I can once they are sold!