Does anyone know the torque setting for rear stub axle nut?

[Araf]

As per title really. I have a 1.6 Wind, but as so many parts are shared with the Twingo, I thought that here would be the best place to ask.

After 30,000 miles the discs are getting close to their service limits, so have bought new discs and pads all round to fit. The problem I have is I cannot find a torque setting for the Wind rear stub axle nut, when fitting the new rear discs. Does anyone have it, or can anyone point me towards a list of torque settings which includes it?

Thanks in advance.

 

[Araf]

Sorry, info now found. Thanks to dbird and Oscar

dbird wrote
BRAKE DISC / PAD DIMENSIONS AND TORQUES
Front brakes:-
Front disc diameter 280mm
Minimum Disc Thickness For Replacement / Ventilated Front : 21,8 mm
Disc Runout Front : 0,03mm
Minimum Pad Thickness Front : 8,2 mm (measurements include lining and pad backing plate)
Front disc bolts : 14N.m
Front guide pin bolts : 35 N.m
Front caliper support bolts : 100 N.m

Rear Brakes:-
Rear disc diameter 240mm
Minimum Disc Thickness For Replacement Rear : 7,0 mm
Disc Runout Rear : 0,06mm
Minimum Pad Thickness Rear : 6,0 mm (measurements include lining and pad backing plate)
Rear disc nut : 175 N.m
Rear guide pin bolts : 32 N.m
Rear caliper support bolts : 105 N.m