Front subframe - is it the same on all 2010 models?

[rsmonkey]

Question: would any 2010 front subframe fit my 1.6 Gordini or would there be a difference between them dependent on Engine / Model?

Had the report back from my mechanic on the Cat D I bought yesterday and it needs a front subframe and drive shaft.

Any assistance greatly appreciated.

Cheers

Chris

 

[rsmonkey]

Do we have anyone on here that can check if the part numbers are the same, £297 new from dealer but there's one on eBay for a 3rd of that

 

[mazmaz]

what is the front subframe ?

dont know name in english but the "berceau moteur" are different in PH1 et Ph2 (the big black frame where the engine is )

 

[rsmonkey]

This is the front subframe off a 1.1 expression that is for sale.
Is this something you think they would make stronger / different for the 133?

 

[singlespeed]

The anti roll bar is different, but likely to be the same mountings with different sized bushes in the clamps.
The dogbone engine mount too.

Does this one have the rivnuts fitted for the undertray? Lower models dont have an undertray, so may not have the nuts instaled.

The basic mountings to the chassis should be fine and the wishbone mountings look the same but you would need to measure them to be sure

 

[rsmonkey]

Here are a couple more pics from the advert.
Not sure if it has the rivnuts in place would have to ask the seller.
Not sure if anyone can see the same number stamped into theirs?

 

[mazmaz]

even on Twingo RS theire is 3 version (dont know why probably cause the manifold have been modified ar some point )
77 11 167 488 R1 Ph1
77 11 162 781 R1 Ph2
77 11 167 489 R2

so i will not go for a non RS one

 

[rsmonkey]

Darn it thanks for the info. Looks like I'm buying new from Renault!

 

[singlespeed]

If you look at the centre of the subframe below the radiator fan, you should be able to read the number.
Mine is 089B843C

 

[rsmonkey]

The one for sale on eBay is 089A834C so they must be different