Injectors and fuel rail ... IWP 042

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Erm unsure on codes but clio 172/182 injectors fit and are 40cc better flow and can be used with standard GT fuel rail which doesn't really need uprating..
 
Brilliant thank you, Will the fuel rail on the tce be ok or the fuel rail off a 182 fiT ok....

I've ordered 182 injectors with fuel rail for my 1.2 tce will It fit or do I need another fuel rail?!?

Cars having larger turbo fitted at the moment so need to ask swiftly on this... :D
 
The car is with power speed now so I can't check this out... Hence mynquest for info on here :)
 
I seem to remember one of the GT owners leaving the 182 fuel rail with Paul at RS tunning for him to use as a spare, as it didn't fit... Could be wrong though
 
singlespeed":otqsac74 said:
I seem to remember one of the GT owners leaving the 182 fuel rail with Paul at RS tunning for him to use as a spare, as it didn't fit... Could be wrong though

That was me! We lined it up and no way would that line up.

182 rail was different spacing by a long way but the injectors work with the original fuel rail from the 1,2TCe
 
So will my standard rail fit.... Is the 1.2 Clio tce rail the same as twingo tce rail.
 
waitey":hqteyys1 said:
singlespeed":hqteyys1 said:
I seem to remember one of the GT owners leaving the 182 fuel rail with Paul at RS tunning for him to use as a spare, as it didn't fit... Could be wrong though

That was me! We lined it up and no way would that line up.

182 rail was different spacing by a long way but the injectors work with the original fuel rail from the 1,2TCe



Absolute gold dust.... Late at night... Boom theres the answers... You guys are really cool and helpful on here.... Get in.... Injectors are on order so will add this to the build best they are in for when it's mapped.

Just have a spare 182 rail to sell.... It came as a whole package so havnt lost any money either bonus, :D
 
The clio 1,2TCe rail should be the same as the twingos mate.

Don't forget as soon as the bigger injectors are in it will need mapping ASAP.... mine were put in when the car was already on the rollers lol.
 
Ok so the next question is do I add the injectors now then drive it to ktec for mapping..... Or do I get ktec to add them in when they map it.....

The car is in ashford Kent.... So it will be a long drive to ktec in bournmouth....

Injectors have arrived... Quick clean up with wd40... :)

You think the injectors were a good idea then?.
 
waitey":2ir20pre said:
singlespeed":2ir20pre said:
I seem to remember one of the GT owners leaving the 182 fuel rail with Paul at RS tunning for him to use as a spare, as it didn't fit... Could be wrong though

That was me! We lined it up and no way would that line up.

182 rail was different spacing by a long way but the injectors work with the original fuel rail from the 1,2TCe


What else have you had done to the engine?

Im having gt1544 turbo, custom manifold, large front mount, naca bonnet vent to get cooler air to the filter, Already had full exhaust system. Obviously open filter. And injectoroonies...
 
It's ok mate if you have questions, just ask away it's the point of forum threads, powerpeed in ashford, andy is the manager matt is doing my car. Are you thinking of having some work done?
 
Not in particular. Ashford is not too far from me, so I was wondering if you'd found a Renault specialist down this way. I do know of Powerspeed. :oops: Friends speak highly of their work on exhausts.
 
Top