Ktec exaust fitting enquiry

[Cup RS 133]

Hi everyone just fitted a ktec downpipe system, was wondering for those who have bought this system did u get new backbox hanger with it. If not did you use the hole the oem exaust hung on to cause it seems really tight. I tried in the middle one but the the tailpipe wouldn't fit cause it was too high up in the middle slot of the bush hope this makes sense.

 

[poweller23]

When I fitted mine I used all the same hangers plus exhaust rubbers as the standard ones . The rear exhaust pipes were sat close to the bumper could only get a finger between the exhaust and the bumper . Hope this helps

 

[Cup RS 133]

Cheers bud it's been ok on the oem hanger just shows on the ktec website a picture of the system with a hanger on it thought u may of needed a aftermarket one.