Brendan5691
Active member
- Joined
- Apr 19, 2011
- Messages
- 37
- Reaction score
- 0
just wondering if anyone else has done this, and what springs are best and how much shall i lower it by ?
orbital":22proyqk said:when buying them and having it fitted, bare in mind they were tested on a stock 133 set up not cup. they will drop lower then cup springs but not what they state as thats the drop for non-cup springs if you find or have anyother custom made springs lowering the a stated 40mm drop you'll need shorter dampners
Twingogeekeo":3egrqo4k said:When its next to cars you can tell the difference alot of people was relising at the national meet
Sharpy":3d0mf2ox said:Put my 60mm on today...its very low rubs too much at the back due to the offset on my wheels so having to get some 40mm ones made for the back but the front is spot on
Sharpy":1crlq5y4 said:Put my 60mm on today...its very low rubs too much at the back due to the offset on my wheels so having to get some 40mm ones made for the back but the front is spot on
Enter your email address to join: