Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Twingo Discussions by Generation
Twingo Renaultsport 133
Wiring behind steering wheel
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Twingo Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="singlespeed" data-source="post: 170395" data-attributes="member: 264"><p>Have you got autolights enabled? If so, switch it off.</p><p></p><p>Unplug the power to the new additional relay. And disconnect the wires to it and tape up the ends to separate them</p><p></p><p>Headlight flash- should only flash the main beam</p><p>Sidelights on- only sidelights</p><p>Dip beam on- sidelights and dip beam filament lit</p><p>Dip beam on and also headlight flash- side lights, dip and main beam filaments all lit</p><p>Main beam- sidelights and main beam filament lit</p><p>I think front fogs should work with dip and/or main beam... Not sure about with sidelights</p><p></p><p>Power to the relay through a fuse and connect this to pin 30 on the relay</p><p></p><p>Headlights onto main beam and check you have +12v between the cable you connected to the MAIN beam and battery -ve. If good, connect to terminal 85 of the relay</p><p></p><p>The cable from from chassis ground goes onto pin 86 of the relay, to make a circuit through the relay coil when main beam has power. Main beam on, Now, check you have +12v at terminal 87 which should now be live</p></blockquote><p></p>
[QUOTE="singlespeed, post: 170395, member: 264"] Have you got autolights enabled? If so, switch it off. Unplug the power to the new additional relay. And disconnect the wires to it and tape up the ends to separate them Headlight flash- should only flash the main beam Sidelights on- only sidelights Dip beam on- sidelights and dip beam filament lit Dip beam on and also headlight flash- side lights, dip and main beam filaments all lit Main beam- sidelights and main beam filament lit I think front fogs should work with dip and/or main beam... Not sure about with sidelights Power to the relay through a fuse and connect this to pin 30 on the relay Headlights onto main beam and check you have +12v between the cable you connected to the MAIN beam and battery -ve. If good, connect to terminal 85 of the relay The cable from from chassis ground goes onto pin 86 of the relay, to make a circuit through the relay coil when main beam has power. Main beam on, Now, check you have +12v at terminal 87 which should now be live [/QUOTE]
Insert quotes…
Verification
Post reply
Twingo Discussions by Generation
Twingo Renaultsport 133
Wiring behind steering wheel
Top